• Input power – 110 VAC
  • Output frequency – 1.2 Khz
  • Controls – phase select, test mode, & off-on


  • Display – sequential LED
  • Controls – sensitivity, short switch and open switch


  • Saves replacement cable.
  • Pinpoints problem in minutes without replacing or further damaging the cable.
  • Find opens and shorts in AC & DC trailing cable.
  • Fault indicator light on transmitter identifies faulted wire eliminating a need for a volt-ohm meter.
  • Transmitter output protected, harmless to operator.
  • Color-coded alligator clips enable quick connection to cable plug when fault occurs.
  • LED indicators on detector for better visibility underground.
  • A mounting bracket is located on the side of the transmitter for detector storage.
  • The detector can be locked to the transmitter.
  • 18 gauge stainless steel enclosure.
  • Finds opens above 350 ohms, shorts below 1000 ohms, without ground monitor filter installed at load end.
  • Finds opens above 1500 ohms, shorts below 350 ohms, with ground monitor filter installed at load end.
Enclosure Dimensions: 11-3/4″L x 6-1/4″W x 3-3/8″H
(298.45 mm x 158.75 x 85.73)
Enclosure Type: 18 gauge Stainless Steel
unit Weight: 7 lbs (3.18 kg)
Operating Voltage: 120 VAC
Backup Battery: No
Max Output Current: 300 mA RMS
Max Output Voltage: 8.5 VAC
Operating Temperature: -10 to 60 C
Outputs: 3 Conductor leads, 1 Ground lead, 1 Pilot Wire lead
Output Frequency: 1.2 Khz (+/-2%)
Display: LED Indicators
Self Test Feature: Yes
Warranty: 180 Days
Enclosure Dimensions: 4-3/4″L x 2-5/8″ W x 2-1/4″ D
(120.65 mm x 66.68 x 57.15)
Enclosure Type: Molded ABS plastic with 18 gauge Stainless Steel
Unit Weight: 16 oz. (453.59 g)
Operating Voltage: 9 VDC Battery
Max Output Current: 50 mA
Max Output Voltage: 2.5 VDC
Operating Temperature: -10 to 60 C
Receiver Frequency: 1.2 Khz (+/-2%)
Display: LED Indicators